Precautions when using a DC resistance tester

When using a DC resistance tester, the following precautions should be taken:

1. Safe operation: Ensure that the tested circuit or component is in a disconnected state and no current passes through before testing. Avoid touching exposed wires and power supplies.

2. Correct connection of test terminals: Connect the test terminals correctly based on the positive and negative polarity of the circuit or component being tested. Ensure that the connection is secure and avoid poor or loose contact.

3. Measurement range selection: Select the appropriate measurement range based on the resistance range of the circuit or component being tested. An excessively high range may lead to inaccurate measurements, while an excessively low range may cause damage to the resistance instrument.

4. Stable measurement environment: When conducting resistance measurements, try to avoid environments with external interference, such as strong electromagnetic fields and voltage fluctuations. These factors may interfere with the measurement results.

5. Repeated measurement: If more accurate measurement results are needed, multiple repeated measurements can be performed and the average value taken as the final result. This can reduce the impact of errors.

6. Read the instructions for use: Before operating the DC resistance tester, be sure to carefully read and understand the relevant instructions and operating guidelines. Different models of testers may have different functions and operating methods.

7. Keep the instrument dry: Avoid exposing the resistance tester to damp environments to prevent damage and inaccurate measurement results.

8. Maintenance and calibration: Regularly maintain and calibrate the resistance tester to ensure its performance and accuracy. Follow the manufacturer's recommendations and perform maintenance and calibration operations on time.

Please note that the above are general precautions, and specific usage requirements and precautions may vary depending on the model and manufacturer of the resistance tester. It is recommended to carefully read and understand the relevant user manual or operating manual before use.

Guodian Zhongxing is a professional manufacturer of secondary protection testing equipment, the production of instruments and equipment, a variety of models to choose from. Guodian Zhongxing is at your service: 4000-828-027, for more information, visit Guodian Zhongxing official website：www.gdzxdl.com.