ZX3030F Substation Automatic System Calibration Source

Features

1. Function: AC sampling device and sampling RTU (Remote Terminal Unit) calirbation

1) AC/DC analog value input measurement

2) state variables input measurement

3) remote control execution testing

4) remote regulation function testing

5) digital value input testing

6) impulse input testing

2. AC Power source

It can output AC voltage, AC current

accuracy 0.05 class

can provide standards of AC/DC voltage/current, power, phase, power factor, frequency, energy.

Output method and output electric quantity can be set arbitrarily

3. Data management

It can save, search, browse, print or delete RTU testing data.

Calibrated parameters can be saved permanently

Technical indicators

AC OUTPUT		INDEX
Voltage	Output range	Basic range: 25V、100V、250V、600V
	Output range	Automatic range: 0V～600V
	Regulation range	0～120% UN
	Regulation fineness	0.002%UN
	Maximum output capacity	≥20VA/Phase
	Output accuracy	0.05%
Current	AC range	Basic range: 1A、5A、25A
	AC range	Automatic range: 0A～25A
	Regulation range	0～120%IN
	Regulation fineness	0.002%IN
	Maximum output capacity	≥20VA/phase
	Output accuracy	0.05%
Frequency	Regulation fineness	45HZ～65Hz
	resolution	0.001Hz
	Accuracy	±0.01Hz
Phase	Regulation range	0°～360°
	Resolution	0.01°
	accuracy	±0.2° ( when rated output voltage current at full range )
Power accuracy		0.05%（reactive power: ≤0.2%）
voltage current waveform distortion		≤0.2%（DC ripple content ≤1%）
voltage current total harmonic aberration rate		≤0.2%
Harmonic component		2~31order, amplitude: 0-40%
voltage current power stability		≤0.02%/2min
Integrated error		0.05%
Working temperature		-20°C～40°C
Reltative humidity		10%～90%
Power supply		220V±10%、48 HZ -51HZ
DC OUTPUT		INDEX
DC Voltage	Output range	Basic range: 25V、100V、250V
	Regulation range	0～120% UN
	Accuracy	0.05%
	Stability	0.02%/2min
	Ripple content	<1%
DC analog quantity measurement
DC voltage measurement	Measuring range	±5V
	Measuring resolution	0-120%
	display digit	6 digts
	Accuracy	0.05%
DC current measurement	Measuring range	±20 mA
	Resolution	0.00%
	Display digit	6digits
	accuracy	0.05%

1. State Variables output

1) Binary code “1” represents “close”, “0” means ”open”

2) Stage varables rating voltage: 24V/48V/110V/220V

3) Output current: max 200mA

4) Channels: 8 independent outputs

2. Pulse output

1) frequency: 0-5KHz adjustable

2) Pulse width: 0.1ms-100ms adjustable

3) Electric level: 24V/48V/110V/220V

4) Pulse number: output number can be set

5) Telecontrol protocol

6) CDT protocol shall conform to DL451-91

7) POLLING protocol shall confirm to DL/T634-2002

3. Working power supply: AC220V±10%

Service commitment

ABOUT US